PMI piranha short barrel body, project gun (see pics!). Has nutsert, quickstrip notch is pre nickel front bottom tube plug is stuck in and steel screw is seized because it was left in during plating. Barrel will need a heavy hone. Came from Gabriel Tyler. Takes a hardline and will need gas through screws. I will trace valve retaining screw threads in body with a tap before sending out. Has spacer in air passage between valve and upper tube (barrel/bolt tube) restricting air and therefore reducing highest velocity. .Tubes are empty. Needs a long hone to remove excess nickel build up in barrel (front and back) and lower tube.
